Water Damage Walls: How to Fix

5 min read

Water damage can be a homeowner’s worst nightmare, as it often leads to expensive repairs. One common symptom of water damage is the appearance of water bubbles on walls.

These unsightly bubbles are actually pockets of moisture trapped between the paint and the wall. If left unattended, they can lead to mold and further deterioration of your home’s structural integrity.

If you are already dealing with water-damaged walls, determining how to fix water bubbles on your walls and prevent them from developing in the first place can be helpful.

How To Fix Water Bubbles on Walls

Swift action at the first signs of paint bubbling on the wall from water damage can prevent more serious issues like structural problems or mold exposure. This step-by-step guide walks you through the necessary steps to fix water bubbles and restore your home’s beauty.

STEP 1: Identifying the Cause

First inspect the water-damaged walls and their surrounding areas for leaks, cracks, or any other potential entry points for water or moisture. Identifying and addressing the root cause is essential to ensure the issue does not recur.

STEP 2: Stopping the Water Intrusion

Once you have identified the cause, address any leaks immediately. This may involve patching up holes, replacing pipes, or fixing roofing issues. It may also be necessary to apply caulk or sealant to any cracks or gaps around windows, doors, or in the foundation to prevent further water intrusion.

STEP 3: Preparing for Repairs

Before dealing with the water bubbles, ensure the wall is completely dry. Use fans, dehumidifiers, and open windows to aid the drying process.

Remove any furniture or wall décor and lay down drop cloths to protect your floors from spills and debris. Finally, wear safety gear such as gloves, masks, and eyewear. It’s critical to protect yourself when dealing with repair work, especially in situations involving water damage and potential mold.

STEP 4: Assess the Damage

Before starting the repairs, check for signs of severe moisture intrusion, such as any softness or discoloration in the affected area. This will help you determine the extent of the damage caused by water or moisture. In addition to a visual inspection, using a moisture meter can help you detect any hidden moisture.

STEP 5: Removing the Damaged Material

After allowing the wall to dry completely and putting on your safety gear:

1. Remove the damaged material with caution.
2. Use a utility knife to score around the bubbles and carefully peel or scrape off the material to avoid causing more damage.
3. Check behind the removed materials for mold or further signs of water damage.Doing so helps you determine if other repairs are necessary before repatching the surface.

STEP 6: Preparing the Wall for Repair

Wash the affected wall with a mildew-killing solution to prevent future growth. Allow the area to dry completely before you proceed.

Following this, sand down the edges around the removed sections to smooth any unevenness. Remember to use moderate pressure to create a smooth, receptive surface for repair materials without damaging the wall further.

STEP 7: Patching and Repairing the Wall

Fill holes or indentations with a suitable patching compound, ensuring the compound is pressed into all crevices. Once dry, sand the area smoothly to create an even surface. Repeat sanding as required and aim for a surface that matches the texture of its surrounding wall.

STEP 8: Priming and Painting the Wall

Proper priming is the foundation of a durable repair. This is why it’s crucial that you select a primer designed to combat water stains and seal the repaired surface. Make sure to prime the repaired area carefully to create a barrier against any potential moisture intrusion in the future.

Addressing Bubbling Paint and Water Damage in Walls: When To Call the Experts

For minor issues like condensation-related bubbling, it might be possible to repaint the wall after taking the steps described above. However, if you’re dealing with extensive water damage or if the cause of the problem is not easily identifiable or accessible, it’s best to seek expert intervention.

Wall water damage specialists conduct thorough inspections using advanced techniques and equipment to detect hidden moisture and accurately assess the damage and the needed repairs. Best of all, they fix the immediate damage whilst also preventing future issues. They can conduct waterproofing, mold remediation, and water damage restoration in Beaumont to ensure a more permanent solution.

How To Prevent Paint Bubbling on Wall From Water Damage

Here are some tips to help you prevent paint bubbling due to water damage and keep your home in good condition:

• Improve ventilation. Improve ventilation in areas prone to moisture, such as bathrooms and kitchens.
• Enlist regular maintenance. Regularly inspect your home for signs of leaks and repair them promptly. Clean gutters and downspouts to ensure proper water drainage away from your home.
• Consider waterproofing solutions. Sealing basements, applying water-resistant paint, and installing moisture barriers are effective ways to help keep water or moisture out of your walls.

Say Goodbye to Water Damage Woes With Expert Help

Water bubbles on walls indicate moisture infiltration that needs prompt action. It’s possible to repair minor issues yourself with the steps described above, but it’s best to call a professional if the problem is beyond DIY capabilities or if you’re uncertain about the repair process. Water damage repair professionals have the skills and equipment to provide a thorough and lasting fix.

Choosing the right wall water cleanup team can make all the difference in effectively restoring your home. When in doubt, know that you can always count on the certified and experienced experts at Restoration 1 of Beaumont to repair water damage in walls, no matter the extent. Call 951-356-7351 now to get expert help.